The Production Process Of Open Wardrobe

Four coats of polyester varnish on the outside and sides of the cabinet door. Let me share it with you.  Four coats of polyester varnish outside the cabinet (Two coats of primer. The first level blockboard partition should not exceed two layers, with a thickness of ≤ 600mm. Boeing soft film should be pasted inside the cabinet, so we don't need to worry too much. The closing of the basswood solid wood strip is not necessary. The quotation for square meter. 5mm Australian pine board and no Boeing soft film should be pasted inside the cabinet is correspondingly reduced by 50 yuan/. The exposed edges should be closed with the same wooden solid wood line and the first level blockboard substrate of the cabinet should be polished. The drawers are not included, and the craftsman in the production process is familiar with it. The exposed edges should be made of ≤ 5mm thick pine wood and sprayed with topcoat.) Multiple times. The door panels and hardware accessories are provided by the customer, and the following are some precautions for the wardrobe production process.